How To Make An Olive Oil Candle

Ball Jar CandleOlive oil lamps are a beautiful alternative to a candle and can be quite easy to make.

While you can buy premade olive oil candle wicks, they can be somewhat expensive and it is really quite easy to make them yourself with materials you might already have on hand.

olive oil lamp
Materials:
Thick glass container, such as a ball jar
Long piece of wire
Wick (can be made of string or any thin piece of cloth)
Olive Oil
Pliers

Shape the wire into a circle with the pliers, bend one end upward toward the center and form a loop to hold the wick.

Olive oil candle tutorial
Slide the wick through the loop and wrap downward around the wire. The thicker the wick, the larger the flame you will have.

Place the wire and wick assembly into the jar and fill with olive oil until just below the bottom of the loop. Soak the wick completely with the oil and allow the oil to absorb into the fabric before lighting it.

Oil candles are a great alternative in an emergency if you don’t have any wax candles available.  They are also great for everyday use if you love candles, but want a more eco-friendly source of ambience.  Using a high quality olive oil burns with no noticeable scent or smoke and can last for quite a long time.

Remember to always use candles with caution and never leave burning unattended.

Ball Jar Soap Dispenser Tutorial

DIY Ball Jar Soap Pump What you will need:

Ball Jar
Soap Pump (I bought a dollar store soap dispenser and just used the pump)
Glue (Some people use heavy duty dishwasher safe glue, I hot-glued mine)
Scissors, drill or xacto knife

 

 

 

 

 

Take the flat ball jar lid and draw a circle in the center where you want the pump to go through the diameter of the pump (you can eye-ball this). You have a choice now as to how you wish to cut the hole. I started mine with an xacto knife (really watch your fingers if you choose this option) and finished it off with scissors. Others have had success drilling a hole through the lid. Whichever way you choose to go about this, just use caution.

Once the hole has been cut, slide the soap pump through and center it on the lid in the direction you want it to face. Hold everything together with one hand while you glue around the base with the other. If you want things to be extra secure, you could place some glue around the top of the pump before sliding it through the hole as well. I found it easier to put a few dabs of glue around the base to help hold things in place so I could seal it all the way around with glue using both hands.

Ball Jar Soap Dispenser Tutorial Once your glue is dry, just add your favorite soap to the jar, place the lid on top and twist on the band. Done!

I was able to get a pack of 12 Ball Jars for just 8.59 (with tax!) and the soap dispenser at the dollar store, so total cost was right around $1.81 for this cutie.  Not too bad considering these can cost upwards of $20 if you buy them premade.

Happy DIY!